View BA00BC0WCP-V5_8443451.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

datashee t product structure silicon monolithic integrated circuit this product is not designed prot ection against radioactive rays. 1/16 tsz02201-0r6r0a600120-1-2 tsz22111 ? 14 ? 001 www.rohm.com ? 2012 rohm co., ltd. all rights reserved. 26.jun.2012 rev.001 1a variable/fixed output ldo regulators ba x x bc0 series(fixed) ba x x bc0w series(fixed) ba00 bc0wcp-v5(variable) general description the baxxbc0 are low-saturation regulators with an out put current of 1.0 a and an output voltage accuracy of 2%. a broad output voltage range is offered, from 1. 5v to 10v, and built-in overcurrent protection and thermal shutdown (tsd) circuits prevent damage due to short-circuiting and overloading, respectively. features ? output voltage accuracy: 2% broad output range available: 1.5 v -10 v (baxxbc0 series) ? low saturation-voltage type with pnp output ? built-in overcurrent protection circuit ? built-in thermal shutdown circuit ? integrated shutdown switch (baxxbc0wt, baxxbc0wt-5, or baxxbc0wfp series, BA00BC0WCP-V5) key specifications ? input power supply voltage: 16.0v(max.) ? output voltage:(ba00bc0xx) variable (baxxbc0) fixed ? output current: 1a(max.) ? shutdown current: 0 a(typ.) ? operating temperature range: -40 to +105 applications all electronic devices that use microcontrollers and logic circuits packages w (typ.) x d (typ.) x h (max.) to252-3 6.50mm x 9.50mm x 2.50mm to252-5 6.50mm x 9.50mm x 2.50mm to220cp-v5 10.00mm x 20.12mm x 4.60mm to220fp-3 10.00mm x 30.50mm x 4.60mm to220fp-5 10.00mm x 30.50mm x 4.60mm to220fp-5(v5) 10.00mm x 31.50mm x 8.15mm lineup matrix part number output voltage (v) package 1.5 1.8 2.5 3.0 3.3 5.0 6. 0 7.0 8.0 9.0 10.0 variable baxxbc0wt { { { { { { { { { { { { to220fp-5 baxxbc0wt-v5 { { { - { { - - - { - { to220fp-5 (v5) baxxbc0wfp { { { { { { { { { { { { to252-5 baxxbc0t { { { { { { { { { { { - to220fp-3 baxxbc0fp { { { { { { { { { { { - to252-3 BA00BC0WCP-V5 - - - - - - - - - - - { to220cp-v5 to220cp- v 5 to220fp-3 t o 22 0 fp- 5 t o 22 0 fp- 5 ( v 5) t o 2 5 2- 3 t o 2 5 2- 5 downloaded from: http:///
2/16 baxxbc0 series baxxbc0w series BA00BC0WCP-V5 datasheet tsz02201-0r6r0a600120-1-2 tsz22111 ? 15 ? 001 www.rohm.com ? 2012 rohm co., ltd. all rights reserved. 26.jun.2012 rev.001 lineup maximum output current(max.) shutdown switch package output voltage(typ.) orderable part number 1a with switch to252-5 reel of 2000 1.5 v ba15bc0wfp-e2 1.8 v ba18bc0wfp-e2 2.5 v ba25bc0wfp-e2 3.0 v ba30bc0wfp-e2 3.3 v ba33bc0wfp-e2 5.0 v ba50bc0wfp-e2 6.0 v ba60bc0wfp-e2 7.0 v ba70bc0wfp-e2 8.0 v ba80bc0wfp-e2 9.0 v ba90bc0wfp-e2 10.0 v baj0bc0wfp-e2 variable ba00bc0wfp-e2 to220fp-5 tube of 500 1.5 v ba15bc0wt 1.8 v ba18bc0wt 2.5 v ba25bc0wt 3.0 v ba30bc0wt 3.3 v ba33bc0wt 5.0 v ba50bc0wt 6.0 v ba60bc0wt 7.0 v ba70bc0wt 8.0 v ba80bc0wt 9.0 v ba90bc0wt 10.0 v baj0bc0wt variable ba00bc0wt to220fp-5 (v5) tube of 500 1.5 v ba15bc0wt-v5 1.8 v ba18bc0wt-v5 2.5 v ba25bc0wt-v5 3.3 v ba33bc0wt-v5 5.0 v ba50bc0wt-v5 9.0 v ba90bc0wt-v5 variable ba00bc0wt-v5 to220cp-v5 reel of 500 variable BA00BC0WCP-V5e2 no switch to252-3 reel of 2000 1.5 v ba15bc0fp-e2 1.8 v ba18bc0fp-e2 2.5 v ba25bc0fp-e2 3.0 v ba30bc0fp-e2 3.3 v ba33bc0fp-e2 5.0 v ba50bc0fp-e2 6.0 v ba60bc0fp-e2 7.0 v ba70bc0fp-e2 8.0 v ba80bc0fp-e2 9.0 v ba90bc0fp-e2 10.0 v baj0bc0fp-e2 to220fp-3 tube of 500 1.5 v ba15bc0t 1.8 v ba18bc0t 2.5 v ba25bc0t 3.0 v ba30bc0t 3.3 v ba33bc0t 5.0 v ba50bc0t 6.0 v ba60bc0t 7.0 v ba70bc0t 8.0 v ba80bc0t 9.0 v ba90bc0t 10.0 v baj0bc0t downloaded from: http:///
3/16 baxxbc0 series baxxbc0w series BA00BC0WCP-V5 datasheet tsz02201-0r6r0a600120-1-2 tsz22111 ? 15 ? 001 www.rohm.com ? 2012 rohm co., ltd. all rights reserved. 26.jun.2012 rev.001 block diagrams / standard example application ci rcuits / pin configurations / pin descriptions [baxxbc0t] / [baxxbc0fp] [baxxbc0wt] / [baxxbc0wt-v5] / [baxxbc0wfp] fig.1 [ba00bc0wt] / [BA00BC0WCP-V5] / [ba00bc0wfp] / [ba00bc0wt-v5] fig.2 fig.3 pin no. pin name function 1 ctl output voltage on/off control 2 vcc supply voltage input 3 n.c./gnd nc pin/gnd *1 4 out power supply output 5 n.c. nc pin fin gnd gnd *2 *1 nc pin for to252-5 and gnd pin for to220fp-5 and to220fp-5 (v5). *2 to252-5 only. pin no. pin name function 1 vcc supply voltage input 2 n.c./gnd nc pin/gnd *1 3 out voltage output fin gnd gnd *2 *1 nc pin for to252-3 and gnd pin for to220fp-3 and to220fp-5 (v5). *2 to252-3 only. tsd ocp driver vref 1 0.33 f ctl gnd(to252-5) out fin 4 22 f 2 vcc n.c. 5 vcc r2 r1 3 n.c. (to252-5) gnd (to220fp-5, -5(v5) tsd ocp driver vref 1 0.33 f ctl gnd(to252-5) out fin 4 22 f 2 vcc c 5 vcc r2 r1 3 n.c. (to252-5) gnd (to220fp-5, -5(v5) pin no. pin name function 1 ctl output voltage on/off control 2 vcc supply voltage input 3 n.c./gnd nc pin/gnd *1 4 out power supply output 5 adj pin fin gnd gnd *2 *1 nc pin for to252-5 and gnd pin for to220fp-5 and to220fp-5 (v5). *2 to252-5 only. 1 2345 12345 to220fp-5 to220fp-5 (v5) 1 2 3 4 5 12345 to220fp-5 to220fp-5 (v5) to220fp-3 123 to252-3 top view 1 2 3 to252-5 top view top view pin external capacitor setting range vcc (1pin approximately 0.33 f. out (3pin) 22 f to 1000 f pin external capacitor setting range vcc (2pin) approximately 0.33 f. out (4pin) 22 f to 1000 f pin external capacitor setting range vcc (2pin) approximately 0.33 f. out (4pin) 22 f to 1000 f to220cp-v5 to252-5 fin 1 2 3 4 5 fin 1 2 3 4 5 1 2 3 4 5 tsd ocp driver vre f 1 vcc n.c. out 2 3 22 f gnd fin 0.33 f (to252 -3) gnd (to252 -3) r1 r2 (to220fp-3, to220fp-5(v5)) downloaded from: http:///
4/16 baxxbc0 series baxxbc0w series BA00BC0WCP-V5 datasheet tsz02201-0r6r0a600120-1-2 tsz22111 ? 15 ? 001 www.rohm.com ? 2012 rohm co., ltd. all rights reserved. 26.jun.2012 rev.001 absolute maximum ratings (ta = 25c) parameter symbol limits unit power supply voltage v cc 18 *1 v power dissipation to252-3 p d 1200 *2 mw to252-5 1300 *3 to220fp-3 2000 *4 to220fp-5 2000 *4 to220fp-5 (v5) 2000 *4 to220cp-v5 2000 *4 operating temperature range t opr ? 40 to +105 c ambient storage temperature t stg ? 55 to +150 c maximum junction temperature t jmax 150 c *1 must not exceed pd. *2 derated at 9.6mw/c at ta>25c w hen mounted on a glass epoxy board (70 mm 70 mm 1.6 mm). *3 derated at 10.4mw/c at ta>25c when mounted on a glass epoxy board (70 mm 70 mm 1.6 mm). *4 derated at 16mw/c at ta> 25c recommended operating ratings parameter symbol min. max. unit input power supply voltage v cc *5 3.0 16.0 v input power supply voltage v cc *6 v o +1.0 16.0 v output current i o - 1 a variable output voltage setting value v o 1.5 12 v *5 when output voltage is 1.5 v, 1.8 v, or 2.5 v. *6 when output voltage is 3.0 v or higher. electrical characteristics baxxbc0 series baxxbc0w series (unless otherwise specified, ta = 25c; v ctl = 3 v; v ccdc *7 ) parameter symbol min. typ. max. unit conditions output voltage v o v o (t) 0.98 v o (t) v o (t) 1.02 v io = 200ma shutdown circuit current isd - 0 10 a v ctl = 0 v while in off mode minimum i/o voltage difference *8 ? vd - 0.3 0.5 v io = 200ma vcc = 0.95 vo output current capacity i o 1 - - a input stability *9 reg.i - 15 35 mv vcc= vo+1.0v 16v, io = 200ma load stability reg.l - 35 75 mv io = 0ma 1 a temperature coefficient of output voltage *10 tcvo - 0.02 - %/c io = 5ma ? tj = 0c to 125 vo (t): set output voltage *7 vo = 1.5 v, 1.8 v, 2.5 v : vcc = 3.3 v, vo = 3.0 v, 3.3 v : vcc = 5 v, vo = 5.0 v : vcc : 8 v, vo = 6.0 v : vcc = 9 v, vo = 8.0 v : vcc = 11 v, vo = 9.0 v : vcc = 12 v, vo = 10.0 v : vcc = 13 v *8 vo 3.3 v *9 change vcc from 3.0 v to 6 v if 1.5 v vo 2.5 v. *10 not 100% tested ba00bc0w series (unless otherwise specified, ta=25 , vcc=3.3v, v ctl =3v, io=200ma, vo=2.5v setting) parameter symbol min. typ. max. unit conditions shutdown circuit current isd - 0 10 a v ctl = 0v while in off mode bias current ib - 0.5 0.9 ma i o = 0ma reference voltage(ctl terminal) vc 1.225 1.250 1.275 v i o = 50ma minimum i/o voltage difference ? vd - 0.3 0.5 v i o = 500ma, v cc = 2.5v output current capacity io 1 - - a ripple rejection r.r. 44 55 - db f=120hz, ein 12 =-20dbv, io=100ma input stability reg.i - 15 30 mv vcc = vo + 1.0 v 16v, io = 200ma load stability reg.l - 35 75 mv i o = 0ma 1a temperature coefficient of output voltage *11 tcvo - 0.02 - %/c i o = 5ma, tj=0c to 125c output short current ios - 0.40 - vcc=16v ctl on mode voltage vth1 2.0 - - v active mode, i o = 0ma ctl off mode voltage vth2 - - 0.8 v off mode, i o = 0ma ctl input current iin 40 80 130 a i o = 0ma *11 not 100% tested *12 ein=input voltage ripple downloaded from: http:///
5/16 baxxbc0 series baxxbc0w series BA00BC0WCP-V5 datasheet tsz02201-0r6r0a600120-1-2 tsz22111 ? 15 ? 001 www.rohm.com ? 2012 rohm co., ltd. all rights reserved. 26.jun.2012 rev.001 typical performance curves (unless otherwise specified, ta = 25c, vcc = 8 v, v ctl = 2 v, i o = 0 ma) 0 0.5 1.0 1.5 3 fig.4 circuit current circuit current : i cc [ma] fig.7 load stability 0 1 2 4 5 6 output voltage : v out [v] fig.5 input stability (io=0ma) 0 1 2 4 5 6 3 output voltage : v out [v] fig.6 input stability (io = 1 a) 0 1 2 4 5 6 3 output voltage : v out [v] downloaded from: http:///
6/16 baxxbc0 series baxxbc0w series BA00BC0WCP-V5 datasheet tsz02201-0r6r0a600120-1-2 tsz22111 ? 15 ? 001 www.rohm.com ? 2012 rohm co., ltd. all rights reserved. 26.jun.2012 rev.001 typical performance curves - continued fig.10 output voltage vs temperature fig.11 circuit current temperature fig.9 ripple rejection fig.8 i/o voltage difference . . . . . . . . . . . . . . . . . . . rr i [a] r l a g d [] [ba50bc0wfp] downloaded from: http:///
7/16 baxxbc0 series baxxbc0w series BA00BC0WCP-V5 datasheet tsz02201-0r6r0a600120-1-2 tsz22111 ? 15 ? 001 www.rohm.com ? 2012 rohm co., ltd. all rights reserved. 26.jun.2012 rev.001 typical performance curves - continued fig.13 ctl voltage vs output voltage fig.12 circuit current classified by load fig.14 ctl voltage vs ctl current [ba50bc0wfp] . . . . . . rl lag l [] rl rr i l [ua] [ba50bc0wfp] fig.15 thermal shutdown circuit [v] [ba50bc0wfp] downloaded from: http:///
8/16 baxxbc0 series baxxbc0w series BA00BC0WCP-V5 datasheet tsz02201-0r6r0a600120-1-2 tsz22111 ? 15 ? 001 www.rohm.com ? 2012 rohm co., ltd. all rights reserved. 26.jun.2012 rev.001 application information i/o equivalence circuit power dissipation ? to220fp-3/to220fp-5/to220fp-5 ? v5 ? to252-3/to252-5 the characteristics of the ic are great ly influenced by the operating temperature. if the temperature exceeds the maximum junction temperature t jmax , deterioration or damage may occur. implement proper thermal designs to ensure that power dissipation is within the permissible range in order to prev ent instantaneous damage resulting from heat and maintain the reliability of the ic for long-term operation. the following method is used to calculate the power consumption pc (w). pc = (vcc C vo) io + vcc icca power dissipation pd pc the load current io is calculated: calculation example: vcc = 6.0 v and vo = 5.0 v at ta = 85c 31k 2k 27k ctl vcc r2 r1 vcc out fig.16 fig.17 * for the ba00bc0wt, connect r1 and r2 externally between the c and gnd pins and between the out and c pins. fig.18 fig.19 0 15 25 20 10 5 25 50 75 125 150 100 0 a mbient temperature ta [ c ] (1)20.0 (2)2.0 (2) during ic without heat sink operation. j-a = 62.5 (c/w) (1) when using an infinite heat sink. j-c = 6.25 (c/w) pow er dissipation pd [w] 0 1.2 2.0 1.6 0.8 0.4 25 50 75 125 150 100 0 a mbient temperature ta [ c ] 1.30 ic mounted on a rohm standard board board size: 70 70 1.6 mm copper foil area: 7 7 mm to252-5 ja=96.2 (c/w) to252-3 ja 104.2 (c/w) power diddipation pd [w] to252-5 to252-3 ja = 96.2c/w ? 10.4mw/c 25c = 1300mw 85c = 676mw vcc : input voltage vo : output current i o : load current icca : circuit current io pd ? vcc icca vcc ? vo io 0.676 ? 6.0 icca 6.0 ? 5.0 io 550ma (icca 20ma) equation: v o = vc (r1 + r2) / r1 (vc = 1.25 v (typ.)) the recommended r1 value is a pp roximatel y 30 k to 150 k . downloaded from: http:///
9/16 baxxbc0 series baxxbc0w series BA00BC0WCP-V5 datasheet tsz02201-0r6r0a600120-1-2 tsz22111 ? 15 ? 001 www.rohm.com ? 2012 rohm co., ltd. all rights reserved. 26.jun.2012 rev.001 31k 2k 27k ctl refer to the above and implement proper thermal designs so that the ic will not be used under excessive power dissipation conditions under the entire operating temperature range. the power consumption pc of the ic in the event of shorting (i.e. the vo and g nd pins are shorted) can be obtained from the following equation: pc = vcc (icca + ishort) (ishort: short current). peripheral circuit considerations ? vcc pin insert a capacitor (0.33 f approx.) between v cc and gnd. the capacitance will vary depending on the application. use a suitable capacitance and implement designs with sufficient margins. ? gnd pin verify that there is no potential difference betwe en the ground of the application board and the ic. if there is a potential difference, the set voltage will not be output accurately, resulting in unstable ic operation. therefore, lower the impedance by designing the ground pattern as wide and as short as possible. ? ctl terminal the ctl terminal turns on at an operating power supply voltage of 2.0 v or hi gher and turns off at 0.8 v or lower. there is no particular order when turning the power supply and ctl terminals on or off. fig.20 input equivalent circuit vo terminal insert a capacitor between the vo and gnd pins in order to prevent output oscillation. fig.21 output equivalent circuit fig.22 esr vs. i o (22 f) the capacitance may vary greatly with temperature changes, t hus making it impossible to completely prevent oscillation. therefore, use a tantalum aluminum electrolytic capacitor with a low esr (equivalent serial resistance). the output will oscillate if the esr is too high or too low, so refer to the esr characterist ics in fig.22 and operate the ic within the stable region. use a capacitor within a capacitance between 22 f and 1,000 f. below figure, it is esr-to-io stabilit y area characteristics, measured by 22 -ceramic-capacitor and resistor connected in series. this characteristic is not equal value perfectly to 22 -aluminum electrolytic capacitor in order to measurement method. note, however, that the stable range suggested in the figure depends on the ic and the resistance load involved, and can vary with the boards wiring impedance, input impedance, and/or load impedance. therefore, be certain to ascertain the final status of these items for actual use. keep capacitor capacitance within a range of 22f to 1000 f. it is also recommended that a 0.33 f bypass capacitor be connected as close to the input pin-gnd as location possible. however, in situations such as rapid fluctuation of the input voltage or the load, please check the operation in re al application to determine proper capacitance. out 22 f ic 200 400 600 800 1000 0 0.05 0.075 0.1 0.2 0.5 1.0 2.0 io [ma] esr [ ] oscillation re g ion oscillation region stable region 10.0 downloaded from: http:///
10/16 baxxbc0 series baxxbc0w series BA00BC0WCP-V5 datasheet tsz02201-0r6r0a600120-1-2 tsz22111 ? 15 ? 001 www.rohm.com ? 2012 rohm co., ltd. all rights reserved. 26.jun.2012 rev.001 operational notes 1. absolute maximum ratings an excess in the absolute maximum ratings , such as supply voltage, temperature r ange of operating conditions, etc., can break down the devices, thus making impossible to identify breaking mode, such as a short circuit or an open circuit. if any over rat ed values will expect to exceed the absolut e maximum ratings, consider adding circuit protection devices, such as fuses. 2. gnd voltage the potential of gnd pin must be minimu m potential in all operating conditions. 3. thermal design use a thermal design that allows for a sufficient margin in light of the power dissipation (pd) in actual operating conditions. 4. inter-pin shorts and mounting errors use caution when positioning the ic for mounting on printed circuit boards. the ic may be damaged if there is any connecti on error or if pins are shorted together. 5. actions in strong electromagnetic field use caution when using the ic in the presence of a strong electromagnetic field as doing so may cause the ic to malfunction. 6. testing on application boards when testing the ic on an application board, connecting a capacitor to a pin with low impedance subjects the ic to stress. always discharge capacitors after each process or step. always turn the ic's power supply off before connecting it to or removing it from a jig or fixture during the inspection pr ocess. ground the ic during assembly steps as an antistatic measure. use similar precaution wh en transporting or storing the ic. 7. regarding input pin of the ic this monolithic ic contains p+ isolation and p substrat e layers between adjacent elements in order to keep them isolated. p-n junctions are formed at the intersecti on of these p layers with the n layers of other elements, creating a parasitic diode or transistor. for example, the relation between each potential is as follows: when gnd > pin a and gnd > pin b, the p-n j unction operates as a parasitic diode. when gnd > pin b, the p-n junction operates as a parasitic transistor. parasitic diodes can occur inevitable in the structure of th e ic. the operation of parasitic diodes can result in mutual interference among circuits, operational faults, or physical damage. accordingly, methods by which parasitic diodes operate, such as applying a voltage that is lower than the gnd (p substrate) voltage to an input pin, should not be used. 8. ground wiring pattern when using both small signal and large current gnd pattern s, it is recommended to isolate the two ground patterns, placing a single ground point at the gr ound potential of applicatio n so that the pattern wiring resistance and voltage variations caused by large currents do not cause variations in the small signal ground voltage. be careful not to change the gnd wiring pattern of any external components, either. 9. thermal shutdown circuit the ic incorporates a built-in thermal shutdown circuit (tsd circuit). the thermal shutdown circuit (tsd circuit) is designed only to shut the ic off to prevent thermal runaway. it is not designed to protect the ic or guarantee its operation. do not con tinue to use the ic after operating this circuit or use the ic in an environment where the operation of this circuit is assumed. 10. overcurrent protection circuit an overcurrent protection circuit is incorporated in order to prevention destruction due to short-time overload currents. continued use of the protection circuits should be avoided. pl ease note that the current increases negatively impact the temper ature. 11. damage to the internal circuit or element may occur when the polarity of the vcc pin is opposit e to that of the other pins in applications. (i.e. vcc is shorted with the gnd pin while an external capacitor is charged.) use a maximum capacitance of 1000 f for the output pins. inserting a di ode to prevent back-current flow in series with vcc or bypass diodes between vcc and each pin is recommended. downloaded from: http:///
11/16 baxxbc0 series baxxbc0w series BA00BC0WCP-V5 datasheet tsz02201-0r6r0a600120-1-2 tsz22111 ? 15 ? 001 www.rohm.com ? 2012 rohm co., ltd. all rights reserved. 26.jun.2012 rev.001 fig.23 bypass diode fig.24 example of simple bipolar ic architecture status of this document the japanese version of this document is fo rmal specification. a customer may use this translation version only for a reference to help reading the formal version. if there are any differences in translation version of this document formal version takes priority. gnd p n p n n p p a ? gnd n p p b ? ( npn ) b n e c gnd p transistor (npn) resistor pin a p substrate parasitic elements pin b n p n ( pina ) gnd parasitic elements gnd (pinb) b c e parasitic elements or transistors p substrate parasitic elements v cc output pin diode for preventing back current flow bypass diode downloaded from: http:///
12/16 baxxbc0 series baxxbc0w series BA00BC0WCP-V5 datasheet tsz02201-0r6r0a600120-1-2 tsz22111 ? 15 ? 001 www.rohm.com ? 2012 rohm co., ltd. all rights reserved. 26.jun.2012 rev.001 ordering information b a x x b c 0 x x x - e2 part number output voltage 00:variable other:fixed current capacity bc0 : 1a shutdown switch w : include none:without packages fp : to252-3 to252-5 t : to220fp-3 to220fp-5 to220fp-5(v5) cp : to220cp-v5 packaging and forming specification e2: embossed tape and reel none: container tube physical dimension tape and reel information (unit : mm) to252-3 2 1 3 0.8 0.65 0.65 1.5 2.5 0.75 fin 6.5 0.2 2.3 0.2 2.3 0.2 0.5 0.1 1.0 0.2 2.3 0.2 9.5 0.5 0.5 0.1 5.5 0.2 1.5 0.2 5.1 +0.2 - 0.1 c0.5 direction of feed 1pin reel ? order quantity needs to be multiple of the minimum quantity. embossed carrier tape tapequantity direction of feed the direction is the 1pin of product is at the lower left when you hold reel on the left hand and you pull out the tape on the right hand 2000pcs e2 ( ) (unit : mm) to252-5 1 2 3 5 4 0.8 0.5 1.27 1.5 2.5 fin 6.5 0.2 2.3 0.2 0.5 0.1 1.0 0.2 9.5 0.5 0.5 0.1 5.5 0.2 1.5 0.2 c0.5 5.1 +0.2 - 0.1 direction of feed 1pin reel ? order quantity needs to be multiple of the minimum quantity. embossed carrier tape tapequantity direction of feed the direction is the 1pin of product is at the lower left when you hold reel on the left hand and you pull out the tape on the right hand 2000pcs e2 ( ) (unit : mm) to220cp-v5 16.92 0.92 3.2 0.1 4.5 0.1 0.82 0.1 8.0 0.2 1.58 0.42 0.1 12.0 0.2 1.778 1.444 4.92 0.2 10.0 +0.3 - 0.1 2.8 +0.2 - 0.1 13.60 15.2 - 0.2 +0.4 4.12 1.0 0.2 (1.0) (2.85) direction of feed 1pin reel ? order quantity needs to be multiple of the minimum quantity. embossed carrier tape tapequantity direction of feed the direction is the 1pin of product is at the lower left when you hold reel on the left hand and you pull out the tape on the right hand 500pcs e2 () downloaded from: http:///
13/16 baxxbc0 series baxxbc0w series BA00BC0WCP-V5 datasheet tsz02201-0r6r0a600120-1-2 tsz22111 ? 15 ? 001 www.rohm.com ? 2012 rohm co., ltd. all rights reserved. 26.jun.2012 rev.001 (unit : mm) to220fp-5(v5) 0.7 7.0 10.0 1.778 1234 5 1.2 0.8 1.8 0.2 8.0 0.2 12.0 0.2 17.0 31.5max. 3.2 0.1 0.2 + 0.4 + 0.3 0.1 + 0.3 0.1 2.8 4.5 0.5 0.1 0.1 + 0.2 + 0.3 0.1 (2.85) 4.25 (2.0) 23.4 17.5 25.8 8.15 ? order quantity needs to be multiple of the minimum quantity. tube containerquantity direction of feed 500pcs direction of products is fixed in a container tube (unit : mm) to220fp-3 23 1 + 0.4 3.2 0.1 0.55 17.0 12.0 0.2 8.0 0.2 2.54 0.5 13.5min. 5.0 0.2 0.8 2.54 0.5 1.3 0.1 + 0.3 10.0 7.0 1.8 0.2 0.2 0.1 + 0.3 2.6 0.5 0.05 + 0.1 + 0.2 0.1 0.1 + 0.3 4.5 2.8 ? order quantity needs to be multiple of the minimum quantity. tube containerquantity direction of feed 500pcs direction of products is fixed in a container tube (unit : mm) to220fp-5 7.0 10.0 2.8 4.5 1.778 0.5 0.1 1.2 0.8 1.8 0.2 8.0 0.2 0.7 12.0 0.2 17.0 13.5min. 3.2 0.1 0.2 + 0.4 + 0.3 0.1 0.1 + 0.2 + 0.3 0.1 + 0.3 0.1 2345 1 2.85 ? order quantity needs to be multiple of the minimum quantity. tube containerquantity direction of feed 500pcs direction of products is fixed in a container tube downloaded from: http:///
14/16 baxxbc0 series baxxbc0w series BA00BC0WCP-V5 datasheet tsz02201-0r6r0a600120-1-2 tsz22111 ? 15 ? 001 www.rohm.com ? 2012 rohm co., ltd. all rights reserved. 26.jun.2012 rev.001 marking diagrams to220fp-3 (top view) part number marking lot number to252-3 (top view) part number marking lot numbe r to252-5 (top view) part number marking lot number to220cp-v5 (top view) part number marking lot number to220fp-5 (top view) part number marking lot number to220fp-5 (v5) (top view) part number marking lot number downloaded from: http:///
15/16 baxxbc0 series baxxbc0w series BA00BC0WCP-V5 datasheet tsz02201-0r6r0a600120-1-2 tsz22111 ? 15 ? 001 www.rohm.com ? 2012 rohm co., ltd. all rights reserved. 26.jun.2012 rev.001 orderable part number package part number marking ba15bc0wfp-e2 to252-5 15bc0w ba18bc0wfp-e2 18bc0w ba25bc0wfp-e2 25bc0w ba30bc0wfp-e2 30bc0w ba33bc0wfp-e2 33bc0w ba50bc0wfp-e2 50bc0w ba60bc0wfp-e2 60bc0w ba70bc0wfp-e2 70bc0w ba80bc0wfp-e2 80bc0w ba90bc0wfp-e2 90bc0w baj0bc0wfp-e2 j0bc0w ba00bc0wfp-e2 00bc0w ba15bc0wt to220fp-5 15bc0w ba18bc0wt 18bc0w ba25bc0wt 25bc0w ba30bc0wt 30bc0w ba33bc0wt 33bc0w ba50bc0wt 50bc0w ba60bc0wt 60bc0w ba70bc0wt 70bc0w ba80bc0wt 80bc0w ba90bc0wt 90bc0w baj0bc0wt j0bc0w ba00bc0wt 00bc0w ba15bc0wt-v5 to220fp-5 (v5) 15bc0w ba18bc0wt-v5 18bc0w ba25bc0wt-v5 25bc0w ba33bc0wt-v5 33bc0w ba50bc0wt-v5 50bc0w ba90bc0wt-v5 90bc0w ba00bc0wt-v5 00bc0w BA00BC0WCP-V5e2 to220cp-v5 00bc0w ba15bc0fp-e2 to252-3 ba15bc0 ba18bc0fp-e2 ba18bc0 ba25bc0fp-e2 ba25bc0 ba30bc0fp-e2 ba30bc0 ba33bc0fp-e2 ba33bc0 ba50bc0fp-e2 ba50bc0 ba60bc0fp-e2 ba60bc0 ba70bc0fp-e2 ba70bc0 ba80bc0fp-e2 ba80bc0 ba90bc0fp-e2 ba90bc0 baj0bc0fp-e2 baj0bc0 ba15bc0t to220fp-3 ba15bc0 ba18bc0t ba18bc0 ba25bc0t ba25bc0 ba30bc0t ba30bc0 ba33bc0t ba33bc0 ba50bc0t ba50bc0 ba60bc0t ba60bc0 ba70bc0t ba70bc0 ba80bc0t ba80bc0 ba90bc0t ba90bc0 baj0bc0t baj0bc0 downloaded from: http:///
16/16 baxxbc0 series baxxbc0w series BA00BC0WCP-V5 datasheet tsz02201-0r6r0a600120-1-2 tsz22111 ? 15 ? 001 www.rohm.com ? 2012 rohm co., ltd. all rights reserved. 26.jun.2012 rev.001 revision history date revision changes 26.jun.2012 001 new release downloaded from: http:///
datasheet d a t a s h e e t notice - ge rev.002 ? 2014 rohm co., ltd. all rights reserved. notice precaution on using rohm products 1. our products are designed and manufac tured for application in ordinary elec tronic equipments (such as av equipment, oa equipment, telecommunication equipment, home electroni c appliances, amusement equipment, etc.). if you intend to use our products in devices requiring ex tremely high reliability (such as medical equipment (note 1) , transport equipment, traffic equipment, aircraft/spacecra ft, nuclear power controllers, fuel c ontrollers, car equipment including car accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or serious damage to property (specific applications), please consult with the rohm sale s representative in advance. unless otherwise agreed in writing by rohm in advance, rohm shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of any ro hms products for specific applications. (note1) medical equipment classification of the specific applications japan usa eu china class class class b class class class 2. rohm designs and manufactures its products subject to strict quality control system. however, semiconductor products can fail or malfunction at a certain rate. please be sure to implement, at your own responsibilities, adequate safety measures including but not limited to fail-safe desi gn against the physical injury, damage to any property, which a failure or malfunction of our products may cause. the following are examples of safety measures: [a] installation of protection circuits or other protective devices to improve system safety [b] installation of redundant circuits to reduce the impact of single or multiple circuit failure 3. our products are designed and manufactured for use under standard conditions and not under any special or extraordinary environments or conditio ns, as exemplified below. accordin gly, rohm shall not be in any way responsible or liable for any damages, expenses or losses arising from the use of an y rohms products under any special or extraordinary environments or conditions. if you intend to use our products under any special or extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of product performance, reliability, etc, prior to use, must be necessary: [a] use of our products in any types of liquid, incl uding water, oils, chemicals, and organic solvents [b] use of our products outdoors or in places where the products are exposed to direct sunlight or dust [c] use of our products in places where the products ar e exposed to sea wind or corrosive gases, including cl 2 , h 2 s, nh 3 , so 2 , and no 2 [d] use of our products in places where the products are exposed to static electricity or electromagnetic waves [e] use of our products in proximity to heat-producing components, plastic cords, or other flammable items [f] sealing or coating our products with resin or other coating materials [g] use of our products without cleaning residue of flux (ev en if you use no-clean type fluxes, cleaning residue of flux is recommended); or washing our products by using water or water-soluble cleaning agents for cleaning residue after soldering [h] use of the products in places subject to dew condensation 4. the products are not subjec t to radiation-proof design. 5. please verify and confirm characteristics of the final or mounted products in using the products. 6. in particular, if a transient load (a large amount of load applied in a short per iod of time, such as pulse. is applied, confirmation of performance characteristics after on-boar d mounting is strongly recomm ended. avoid applying power exceeding normal rated power; exceeding the power rating under steady-state loading c ondition may negatively affect product performance and reliability. 7. de-rate power dissipation (pd) depending on ambient temper ature (ta). when used in seal ed area, confirm the actual ambient temperature. 8. confirm that operation temperat ure is within the specified range described in the product specification. 9. rohm shall not be in any way responsible or liable for fa ilure induced under deviant condi tion from what is defined in this document. precaution for mounting / circuit board design 1. when a highly active halogenous (chlori ne, bromine, etc.) flux is used, the resi due of flux may negatively affect product performance and reliability. 2. in principle, the reflow soldering method must be used; if flow soldering met hod is preferred, please consult with the rohm representative in advance. for details, please refer to rohm mounting specification downloaded from: http:///
datasheet d a t a s h e e t notice - ge rev.002 ? 2014 rohm co., ltd. all rights reserved. precautions regarding application examples and external circuits 1. if change is made to the constant of an external circuit, pl ease allow a sufficient margin considering variations of the characteristics of the products and external components, including transient characteri stics, as well as static characteristics. 2. you agree that application notes, re ference designs, and associated data and in formation contained in this document are presented only as guidance for products use. theref ore, in case you use such information, you are solely responsible for it and you must exercise your own independent verification and judgment in the use of such information contained in this document. rohm shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of such information. precaution for electrostatic this product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. please take proper caution in your manufacturing process and storage so that voltage exceeding t he products maximum rating will not be applied to products. please take special care under dry condit ion (e.g. grounding of human body / equipment / solder iron, isolation from charged objects, se tting of ionizer, friction prevention and temperature / humidity control). precaution for storage / transportation 1. product performance and soldered connections may deteriora te if the products are stor ed in the places where: [a] the products are exposed to sea winds or corros ive gases, including cl2, h2s, nh3, so2, and no2 [b] the temperature or humidity exceeds those recommended by rohm [c] the products are exposed to di rect sunshine or condensation [d] the products are exposed to high electrostatic 2. even under rohm recommended storage c ondition, solderability of products out of recommended storage time period may be degraded. it is strongly recommended to confirm sol derability before using products of which storage time is exceeding the recommended storage time period. 3. store / transport cartons in the co rrect direction, which is indicated on a carton with a symbol. otherwise bent leads may occur due to excessive stress applied when dropping of a carton. 4. use products within the specified time after opening a humidity barrier bag. baking is required before using products of which storage time is exceeding the recommended storage time period. precaution for product label qr code printed on rohm products label is for rohms internal use only. precaution for disposition when disposing products please dispose them proper ly using an authorized industry waste company. precaution for foreign exchange and foreign trade act since our products might fall under cont rolled goods prescribed by the applicable foreign exchange and foreign trade act, please consult with rohm representative in case of export. precaution regarding intellectual property rights 1. all information and data including but not limited to application example contained in this document is for reference only. rohm does not warrant that foregoi ng information or data will not infringe any intellectual property rights or any other rights of any third party regarding such information or data. rohm shall not be in any way responsible or liable for infringement of any intellectual property rights or ot her damages arising from use of such information or data.: 2. no license, expressly or implied, is granted hereby under any intellectual property rights or other rights of rohm or any third parties with respect to the information contained in this document. other precaution 1. this document may not be reprinted or reproduced, in whol e or in part, without prior written consent of rohm. 2. the products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written consent of rohm. 3. in no event shall you use in any wa y whatsoever the products and the related technical information contained in the products or this document for any military purposes, incl uding but not limited to, the development of mass-destruction weapons. 4. the proper names of companies or products described in this document are trademarks or registered trademarks of rohm, its affiliated companies or third parties. downloaded from: http:///
datasheet datasheet notice C we rev.001 ? 2014 rohm co., ltd. all rights reserved. general precaution 1. before you use our pro ducts, you are requested to care fully read this document and fully understand its contents. rohm shall n ot be in an y way responsible or liabl e for fa ilure, malfunction or acci dent arising from the use of a ny rohms products against warning, caution or note contained in this document. 2. all information contained in this docume nt is current as of the issuing date and subj ec t to change without any prior notice. before purchasing or using rohms products, please confirm the la test information with a rohm sale s representative. 3. the information contained in this doc ument is provi ded on an as is basis and rohm does not warrant that all information contained in this document is accurate an d/or error-free. rohm shall not be in an y way responsible or liable for an y damages, expenses or losses incurred b y you or third parties resulting from inaccur acy or errors of or concerning such information. downloaded from: http:///

▲Up To Search▲

Price & Availability of BA00BC0WCP-V5

	To Download BA00BC0WCP-V5 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .